Ome Compatibility Guidelines

Here’s how to check if your stove is compatible with Ome Smart Knobs.
  • Take our compatibility quiz to get a quick thumbs up or down!
  • For more detailed guidelines, refer to the compatibility requirements below.
  • If you’re still unsure about compatibility, we’re here to help! You can:
    1. Send a picture of your stove to hello@omekitchen.com and we’ll let you know.
    2. Order your Ome kit and use the measuring tool provided in your Ome box to check compatibility. If your stove is not compatible, just send your kit back to us for a refund.

Stovetop vs. Range

COMPATIBLE

Gas or electric ranges that have stove knobs that are removable and vertically oriented.

NOT COMPATIBLE

Gas or electric stove tops that have stove knobs horizontally oriented.

Stove Characteristics

1
Bezels
Bezels
COMPATIBLE

Bezels around the stove shaft that are removable.

*Bezels that are removable typically have screws that hold the bezel in place.

*If the bezels on your stove are removable, you may remove them at your discretion. Ome is not responsible or liable for any stove damage, change in stove performance, loss of warranty coverage, or any hazards that may arise from this modification.

Bezels (incompatible section)
INCOMPATIBLE

Bezels around the stove shaft that are not removable.

**Bezels that are not removable will not have screws that can be loosened and removed.

2
Rubber/Plastic Rings
Rubber/Plastic Rings
COMPATIBLE

Rubber or plastic rings around the stove shaft that are removable.

*If the rings around the shaft are removable, you may remove them at your discretion. Ome is not responsible or liable for any stove damage, change in stove performance, loss of warranty coverage, or any hazards that may arise from this modification.

INCOMPATIBLE

Rubber or plastic rings around the stove shaft that are not removable.

3
Depression Around Stove Shaft
Depression Around Stove Shaft
COMPATIBLE

Depressions around the shaft that have a diameter of less than 35mm.

INCOMPATIBLE

Depressions around the shaft that have a diameter of greater than 35mm.

4
Width of Stove Surface (Only applicable for gas ranges)
Width of Stove Surface
COMPATIBLE

The width of the stove surface must be greater than or equal to 71mm.

INCOMPATIBLE

If the width is less the 71mm Ome may be compatible, but you need to make sure the oven door doesn’t hit the knob when it is opened.

Shaft Characteristics

1
Distance Between Shafts
**Measured center of one shaft to the center of the adjacent shaft
Distance Between Shafts
COMPATIBLE

Shafts that are 75mm (2.9in) apart or greater.

INCOMPATIBLE

Shafts that are less than 75mm (2.9in) apart.

2
Shaft Length Beyond Stove Surface
Shaft Length Beyond Stove Surface
COMPATIBLE

Shafts that extend more than 5mm (0.2in) beyond the surface of the stove.

INCOMPATIBLE

Shafts that extend less than 5mm (0.2in) beyond the stove surface OR recess beneath the stove surface.

3
Hole Diameter Around Shaft (Applicable to gas ranges)
Hole Diameter Around Shaft
COMPATIBLE

IF THE STOVE SHAFT IS SHORTER THAN 13mm, the hole around shaft must be greater than 28mm in diameter (for the allen wrench to fit for installation).

*If the stove shaft is greater than 13mm, disregard this requirement.

INCOMPATIBLE

IF THE STOVE SHAFT IS SHORTER THAN 13mm and the hole around shaft is less than 28mm in diameter (the allen wrench will not fit in order to install the Knob).

4
Thickness of Stove Shaft
Thickness of Stove Shaft
COMPATIBLE

Shafts that have a thickness (or diameter) of 6.5mm or less.

INCOMPATIBLE

Shafts that have a thickness (or diameter) of greater than 6.6mm.

If your stove is not compatible with Ome today, don’t worry!

Sign up for the Gen 2 waitlist.

Ome Gen 2 will support a much wider array of stovetops and ranges. By signing up, you’ll be the first to hear about the release and order your kit. No payment required and you can cancel any time.